Bedroom lamps are typically the smallest lamps in your house, but that does not mean that they should not provide good lighting. If your bedroom does not have an overhead light, feel free to add a floor lamp or two in addition to the bedside table lamps.
Lighting fixtures can be used in a variety of ways to bring out the best in all your living spaces. Properly placed lighting fixtures can be used for everything from creating a certain ambiance to dramatizing wall textures and accenting artwork.
Edison experimented on the incandescent lamp for years. He tried platinum and other metal filaments, but came back around to carbon filament. His first successful test was on October 22, 1879.
You've probably noticed that the trim on many lampshades provides most of the ornamentation for the entire shade. That decorative top and bottom border is functional as well as decorative, though. Trim adds a layer of protection for the outermost edge of the shade.
Did you know that one of the biggest complaints about kitchen design is the lack of adequate task lighting? To make prep easier and safer, kitchen work areas should each have their own dedicated task lighting stations.
If you are installing a light fixture in a closet, there may be additional code requirements regarding distance from the edges of shelves or their surfaces. When in doubt, refer to the NEC book for specific details.
On small table lamps, you may notice that the lamp hardware is connected directly to the shade. Known as an “uno,” it attaches directly to the light socket. Make sure the bulb has cooled down before you try to remove the shade.
Recessed light fixtures are installed above the ceiling and have an opening that is flush with the ceiling. This type of lighting sends a relatively narrow band of light in one direction and can be used to provide ambient, task, or accent lighting.
The finial does not have to be merely a functional part with no aesthetic value. We have an excellent inventory of decorative finials that look great with no loss of utilitarian value. Take a moment and choose finials that suit your taste.
The demand for lighting and the costs associated with lighting vary greatly by region. In much of the northeast, midwest and northwest, lighting represents roughly 27 to 35% of total energy consumption in commercial settings.
Did you know that the first lamps used candles and then later oil? Lamp shades made for these lamps were used to minimize and even soften the dispersed light being emitted. The first lamps that used lamp shades began to appear in or around the early 1600s.
Railroad lanterns were used to send signals at night between trains and stations. They usually consisted of a metal base, a globe enclosed in a cage, and a chimney. Elaborate lanterns were given to conductors as a symbol of status.
