How hot is too hot? Polyaspartic flooring is not just durable and long lasting, it’s extremely resistant to high heat. In fact, once the coating has thoroughly cured, it can resist temperatures up to 350 degrees F.
Epoxy flooring is inherently moisture resistant. This is advantageous if you live in a part of the country which sees a lot of snow and ice. Just a little soap and water, and epoxy flooring makes short notice of icy brine and sea salts that can collect on floors in winter.
Another way to stop squeaks between the joist and subfloor is to use a 3-1/2 inch to 4-inch drywall screw angled into the joist and subfloor where they meet. This should pull the joist and subfloor together.
One key advantage to an epoxy floor is its stain resistance. Unlike bare concrete garage floors, epoxy finishes resist stains from oil, grease, gasoline, antifreeze and just about everything else.
Getting the surface of the floor clean is essential during hardwood floor restoration. Be sure to vacuum the floor and remove everything from the room.
Using a straight lay tile pattern in a small or narrow room will make the room appear more narrow that it really is. This is because the grout lines will run parallel to the walls which tricks the brain into thinking it is a smaller space.
What’s hot? While you’re planning for your new kitchen flooring, consider this popular trend: mix-and-match colors and finishes. Paint your cabinets in lighter neutrals, like gray, taupe or cream, and offset them with rich, wood-look vinyl flooring for a fresh, designer touch.
Even when brand new, a single dropped tool or heavy crate can turn a flawless concrete floor into a cracked or pitted one. Not with an epoxy floor. The epoxy in the flooring is shock resistant, which means you don’t have to worry as much about dropping things.
What’s the difference? Some epoxy coatings contain UV-resistant compounds that are designed to resist yellowing in sunlight. In contrast, polyaspartic flooring is fully UV stable, which means it can be exposed to sunlight and will never yellow.
For many pet owners, having hardwood floors can simplify cleaning their home dramatically. Rather than having to constantly rent carpet cleaning machines to get rid of the aroma of wet dog, you may only have to sweep your hardwoods to remove pet hair and dander.
When you need flooring refinished, but need to have access to the room quickly, water-based urethanes are some of the quickest drying products. If we need to apply a wood sealant first, it needs to be completely dry before the finish can be applied.
It’s important to remember that some types of flooring are better at hiding uneven surfaces than others. If you’re ready to install a floor material that isn’t quite so forgiving, we’re always here to help you level the underlying surface.
An epoxy floor should last from 7 to 15 years. Estimates vary from manufacturer to manufacturer, and a floor's ultimate performance will be the result of factors like: use, the quality of the installation and the ambient environment where the floor is located.
Radiant heating stems from the energy transfer that results when a warm surface gives up its heat to a cooler surface. Basically, the heat radiates in all directions from the floor, providing optimum comfort throughout the space.
Polyaspartic coatings are generally applied in a number of different coats, starting with a primer that absorbs into concrete and lets additional coats stick on top of it. This is followed with a second coat and a top coat for a finished product within hours.
Ripping up a concrete floor to replace it (usually involving jackhammers) is not only noisy and messy, it’s also expensive. Since epoxy flooring will use your existing floor as a substrate, there’s less destruction, less mess, and a lot less expense.
Working your way through the many commercial quality flooring options that are out there can take an eternity. That’s why a professional is a great option- they know what works, and they know where your best value may be.
There can be variations in quality, even in an exotic hardwood. Most trees have a denser wood at the center and a less dense, younger wood near to the bark. The interior wood is called the "heartwood," and it's typically the highest grade wood for a given variety.
There are basically three different types of radiant floor heat systems, distinguished primarily by the heat carrying medium. These are radiant air systems, electric radiant floors, and hot water (hydronic) radiant floors.
Have you ever wondered what the difference was between porcelain tile and ceramic tile? Typically, porcelain tile uses sand that’s been more highly refined, which gives you a denser and more durable tile than ceramic, although both of are still excellent options.
If your hardwood floor has taken a beating, consider a vintage refinishing technique. The existing finish is removed and the exposed wood surface is randomly scraped. When the new finish is applied, color pools in distressed areas to create an authentic vintage feel.
Birch hardwood flooring is known for having very wide range of colors. It can be anything from a light yellow color all the way to a dark brownish red. Birch is a little softer than oak (the hardest wood), but that being said, birch is still a strong, durable wood.
With more and more manufacturers switching over to porcelain tile, the choices in color, size, and style are quickly coming in line with the long-lived ceramic industries' hold on the tile market.
“Peaking” is what happens when laminate floor boards do not have sufficient space to expand between floor and molding – the floor boards push together and the “peaks” are high points at the joints.