Are you aware that approximately 50% of the petroleum products and crude oil used in the United States is used in the transport sector alone?
It’s important that you use caution when loading your coal stove. Always open the door or hatch slowly as to allow oxygen to enter and thus burn any combustible gases that are present. Except for during the start-up process, the ash door should never be left open.
Did you know that heating oil tanks are constructed with alarms that sound when the tanks are almost full? The alarms help delivery drivers to avoid over filling the tanks – if an alarm is absent, sometime it is possible to listen for a soft whistle that is produced as air is displaced from the tank while it is filled.
Did you know that it’s not recommended that you start a coal fire unless the temperatures outside fall below 55 degrees over a 24-hour period? This is because otherwise your chimney will not be able to develop enough of a draft for the coal to burn correctly.
One of the biggest misconceptions about oil is that oil, a fossil fuel, formed from dinosaur bones. But oil does not come from dinosaur bones – it comes from tiny, single-celled organisms known as "plankton" that died millions of years ago.
Food-grade lubricants must perform the same functions as other lubricants, such as protecting moving parts from wear and friction, and cooling. In addition, they must resist degradation from food products, chemicals, water, and steam.
Did you know that fuel oil classes are all refined from crude petroleum? Depending on their production method, they are categorized as either a distillate or a residual fuel. Fuel oils Nos. 1, 2, and 4 are all in this class and used for heating.
Petroleum fuels and lubricants are created through the process of refining crude oil. In fact, this is a process that differs extensively from the creation of petrochemicals, which use only pure chemical compounds. Petroleum fuels and lubricants are created using complex mixtures, which can create many different fuel and oil classes.
Kerosene gets its name from Canadian geologist Abraham Gesner, who distilled kerosene from coal in 1846 for use as a lamp oil. The name means "wax oil," and was originally trademarked by Gesner as a lamp oil that burned as cleanly as candle wax.
When you’re getting a coal stove going, open the draft control wide to get the maximum draft, and keep it open until the fire is reasonably hot. Once there’s a substantial bed of hot coals, the stove can be shaken, just don’t shake so much the embers fall into the ash pan.
There are many benefits of heating oil, including precision temperature control. Since the furnace does not need to operate continuously, it tends to be more efficient in heating your home than other systems. Once the heater exchanger has been warmed, it stays warm for a long period.
Open gear grease and lubricants are designed for use in industrial, mining, construction, and marine heavy equipment. Open gear grease and lubricant are excellent for all types of open gears, like wire ropes and rack and pinion gears, as well as girth and pinion gears.
A maintenance-deprived furnace will inevitably become more and more inefficient. As such, proper care has to be given to keep this from happening. However, if you lack the skills or knowledge to do this, your heating oil provider will be happy to oblige.
Motor oil circulates through your engine as it runs, providing a variety of functions. Its main purpose is lubrication of moving parts, but, at the same time, it also cleans the engine, inhibits corrosion or rust, improves seals on gaskets, and cools the engine.
Diesel fuel and the number 2 fuel oil used as heating oil are very similar, which makes it easy for a fuel oil reseller to get a good supply of both from the same place. That's why in addition to heating oil, you can usually find diesel fuel at the same location.
Running an oil change mechanic’s shop means being able to service a wide variety of vehicles. Petroleum suppliers carry all of the oils you need, including standard oils, high mileage, full synthetic, synthetic blends, and more in a variety of ratings.
The fuel oil that we call “kerosene” goes by many names. In laboratory and industrial settings, it’s sometimes referred to as kerosine, while in the British Isles and portions of Asia and Africa, it’s called paraffin or paraffin oil.
Did you know that using anthracite coal is environmentally sound? A big part of this is because it can be a full-cycle resource. Coal can be burned for low smoke, high efficiency heat, and the ashes can be used for acetic landfill and crop fertilizers.
Number 3 fuel oil is a distillate oil for burners that require low-viscosity fuel. However, this term has rarely been used since the mid-20th century.
Motor oil is made up of complex hydrocarbons. These originally were petroleum-based, but synthetic organic compounds have allowed hybrid oils to be made using substances such as polyalphaolefins, also called PAO, and polyinternal olefins, or PIO.
Did you know that crude oil is also used in creating medicine, recreational sporting items, and cosmetics? Ancient people also used crude oil as a substance of binding materials and sealant for water proofing.
Oil suppliers are your one-stop shop for all the car oils and lubricants you need, but they have more than that. Many suppliers also stock other automobile products to help you take care of your vehicles, including washer fluid, filters, and car care chemicals.
