Asphalt concrete is a mixture of aggregates that have been heated, dried and mixed with a binder (asphalt). When used for constructing roads, this material is typically applied using a paving machine which spreads the material to the specified thickness.
Your newly poured asphalt should have at least two days to cure before you walk or drive on it. In hotter weather, three days are needed.
While asphalt is used all over the world, different formulations need to be employed for different climates. In tropical regions for instance, asphalt must have high tensile strength so it won't deform during the heat of the day.
Porous asphalt has gaps between the solids that allows rainwater to be absorbed below the road into a layer of gravel, where it becomes groundwater.
By checking that a company is insured and licensed within the state, potential clients ensure proper removal and replacement of asphalt. Confirming that the asphalt removal reagent used is compliant with EPA may help potential customers choose a contractor.
Some asphalt release agents will use electrostatic charges that allow the solution to stick to vertical surfaces. These charges allow the agent to repel asphalt and prevent it from sticking back to the surface it was on.
Asphalt pavements are already more affordable than other traditional pavements, but did you know that they can also be built thinner? This further increases your cost savings!
According to research, asphalt reduces highway noise by 3 to 5 dB(A) and more because it is porous. Due to its air voids, it not only helps water runoff but also helps absorb road noise.
When did you last schedule seal coating service for your asphalt driveway? With seal coating, your asphalt driveway can be better protected against the elements.
Emulsified asphalt is a slurry that includes soap and water. Once applied, the water evaporates, leaving a thin layer of black asphalt bitumen behind. Asphalt emulsion is often used in road construction.
Did you know that smoother pavement lasts 10-25% longer than normal or rough pavement? Smoother pavement results in a longer lifespan, reducing maintenance costs and obviously giving a better impression.
Asphalt removal is sorted into five different classes, ranging from Class I to Class V. Class I requires the use of asphalt remover to fix irregular surfaces, while Class V entails a project that removes asphalt to different depths.
According to The Road Information Program, the average US motorist spends about $402 annually on vehicle wear and tear as a result of driving on poorly constructed roads. Asphalt roads can solve that problem.
Hot mix asphalt concrete (HMAC) is the formulation most commonly used on highways and airfields. The mixture must be kept at a high temperature in order to decrease the binder's viscosity. Truck beds that haul HMAC are heavily regulated.
What is hot mix asphalt? This is a type of paving material that's commonly used for building roads. This material is very well suited for the application as it can hold up quite well to heavy traffic. It is also weather-resistant and flexible enough to contract or expand without damage.
Asphalt contains saturated hydrocarbons, which consist of carbon and hydrogen atoms arranged in a tree structure where all carbon-carbon bonds are single. The percentage of saturates in asphalt correlates with the point at which the material softens.
Do you know that the average asphalt surface depreciates only 40% in condition during the first 75% of its life? This means that with proper maintenance, asphalt paving can last a long time.
Beyond roads and highways, asphalt paving is used everywhere else. From parking lots to airport runways, we can always rely on asphalt pavements for a strong, safe, and quiet ride.
One of the benefits of asphalt releasing agents and lubricant use is reduced cleanup time. Indeed, this translates quite literally to fewer man hours spent in the dreaded post asphalt cleanup phase after a long day of hauling and saves your company money in cleanup costs.
Impervious pavement forces water to run off into ditches, which can cause localized flooding or even contamination of rainwater depending on the direction of the flow.
In the US, about 60 million tons of asphalt is recycled every year compared to just 2 million tons of plastic. Asphalt is 100% renewable and is in fact the most recycled material in the country!
If you will be using a pressure washing service to clean your parking lot, ask them about the pressure they use and their chemicals to make sure both are compatible with asphalt in order to get the longest life out of the surface.
Professional-grade asphalt releasing agents today are completely biodegradable and nonhazardous! This means that they leave no mess in their wake. Furthermore, asphalt lubricants are safe for human skin, meaning they won't burn or cause inflammation.
Did you know that asphalt pavements can be completed overnight? This means commuters can drive home at night and be surprised to see a brand-new pavement the next day without experiencing any delays or traffic!
