Have you been putting off a particular home improvement project around the house because you aren’t sure if you can handle the wiring work? Rather than trying to figure it out on your own, it’s always a good idea to call in a professional electric contractor.
Have you been hesitant to contact us about the wiring in your new office building because the last owner never had any code violation issues? Since electrical codes can change at any time, it may still be necessary to upgrade your wiring.
The alternative/direct current debate was a very dramatic debate back in the 1880s. Thomas Edison invented direct current, DC, while Nikola Tesla invented the alternative current, AC, and both made their case for using one or the other. Eventually AC won as it was safer and more easily conducted over a long distance.
When it comes to overhead power lines, the number of conductors (or lines) on the circuit will depend on the operating voltage and the load being carried by that circuit. Typically, up to four conductors form a phase, with three phases per circuit and two circuits per overhead line route.
When you manage a building with several tenants, a single power outage can mean getting dozens of phone calls about the issue. If you worry that the inconvenience could eventually drive tenants away, it’s smart to call in an electrician to check it out right away.
Did you know that when lightning strikes, it flows from darkened cloud and then to the ground? In fact, we do not see this; when we see a lightning strike what we are seeing is actually the electrical charge from the strike going back up into the cloud!
The U.S. Fire Administration estimates that there are more than 67,000 fires every year in the country that can be traced to an electrical problem. Obviously, relying on a qualified electrician is important from a safety standpoint.
Following the demise of the incandescent bulb and the questionable lighting properties of fluorescent bulbs, light-emitting diode (LED) systems have emerged as a long-term, cost-effective solution for providing superior lighting, long service life, and minimal energy consumption.
Faulty electrical wiring is particularly problematic in older homes, which are not often equipped to handle today’s heavy-duty electrical demands. If you have fuses blowing frequently or lights that dim or flicker, it’s time to call an electrical contractor.
Electric energy is one of the most used power sources on Earth. Electricity itself is actually harmless to the planet and enables the human race to live with vast amounts of equipment and gadgets that make our lives easier and much more fun.
If your building project requires construction of high-voltage transmission lines, do not assign the task to unqualified members of your crew. Use only contractors who specialize in this type of delivery system, as safety at every phase is vital.
Commercial electricians inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes. They can diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
If you’re experiencing problems with your home office computer network, the problem might be EMI (electromagnetic interference). EMI disrupts electrical and can be caused by unshielded wiring, CFLs and fluorescent lights or poorly shielded electronic devices.
Did you know high voltage transmission carriers have to use different conductors? Bundle conductors are often utilized at high voltages because they can increase the electrical current capacity.
How much lux does it take to light a room? Great question. General household lighting tends to produce light levels of about 150 to 200 lux, which is sufficient for basic navigation but inadequate for focused work or more detail-oriented tasks.
An important component of proper power line construction is the foundation of the tower structure. This formation can be stabilized considerably by the use of anchors, guy wires, and braces.
If you have fluorescent tube fixtures in your workshop, garage or kitchen light fixtures, here’s some good news: LED light tubes are now available for these fixtures. They cost less to operate and last four or five times longer.
Do you know how much energy is wasted in your office through the use of computers, copiers, and scanners? Turn off all these electrical devices with the office is closed or the items are not in use. These devices also generate heat, which can make your HVAC system work harder!
If your building has been experiencing an inordinate amount of power outages lately, there could be an issue with the wiring. Bringing in a skilled commercial electrician can be the best way to uncover and correct the issue.
Did you know overhead power lines usually have a ground conductor? These may also be referred to as shield wires and are used to minimize lightning strikes on the phase conductors.
What does lux mean? In lighting, the term is used to describe the total level of illumination or light intensity produced by a combination of the natural and electrical light sources found in a defined space.
Every construction project needs to fit within its budget, whether it’s a simple renovation or a sprawling new construction. Using experienced commercial electricians is one of the best ways to keep the installation of electrical systems from going over your budget.
Before electricity was a way of life, ancient Egyptians were aware that lightning and shocks from electric fish were very powerful. They used to refer to these fish as the “Thunderers of the Nile.”
What is an arc-fault breaker? An arc-fault breaker will trip once they sense that arcing. This is a smart device that can differentiate between a naturally occurring arc and an unsafe occurrence.