Benjamin Franklin didn't just discover electricity; he also invented the lightning rod! In fact, his extensive electricity research in the 18th century allowed his lightning rod to conduct a lightning strike through a grounded wire. Today this knowledge is used to protect tall buildings during storms.
You probably work with electricity every day, but do you know how fast this energy phenomenon travels? If you guessed that electricity is lightning fast, traveling at the speed of light, you're right.
When you have more electronics than your room has electrical outlets, you may have to turn to unsightly power strips to make everything work. Remember, an electrical contractor can often add the extra outlets wherever you need them most.
In general commercial electrical maintenance, the supply sources for your main systems need to be regularly checked for structural integrity as well as internal stability. This also should include a thorough inspection of large systems and equipment.
Although you may be able to make do by running extension cords across the room, this can create a trip hazard for your family. If you’re looking for a safer way to get power to an area without a convenient outlet, it’s time to call us in to take a look.
Retail locations need more power lines than just the ones in the store. Outdoor electrical lines are common for lights, signs, displays, and more. Commercial electricians can run all of the lines you need, and connect them to the inside of the store for easy control.
Both circuit breakers and fuses work to protect your electrical system, but fuses predate circuit breakers by several decades. The first fuses were used in the mid-1800s, and were put on telegraph wires and stations to protect them from lightning strikes.
Once substations step down the voltage from large lines and transfer to smaller lines, the power can then be taken off by an EMC or industrial customer. It can also continue to lines of 115-kV, 69-kV or 46-kV.
Have you been hesitant to contact us because your landscaper says they can handle the exterior lighting for you? Remember, electrical work is a highly specialized trade, so it’s usually safer to stick to an electrical professional whenever you’re dealing with wiring.
Were you aware that laptop computers and inkjet printers consume 90% less energy than their alternatives? If you can, try to use these in your office rather than the standard desktop computer.
Do you know the range of a high voltage overhead power transmission line? The voltage can run between 115,000 and 138,000 volts. These are often used to transmit large amounts of power and connect to large consumers.
Have you ever wondered why birds sitting on a power line don’t get electrocuted? If a bird sits on just one power line it is safe. However, if the bird touches another line with a wing or a foot, it creates a circuit, causing the electricity to flow through the bird’s body.
To improve safety when we are installing an electrical system, we select equipment and employ systems and design techniques that promote safety and reduce hazards in order to lessen the risk of danger and injury.
Many older houses were built with outlets that only have space for two prongs, but unfortunately many modern appliances have enough power to warrant a third grounding plug. Electric contractors can perform a retrofit that will allow you to safely use your three-pronged plugs.
You probably already know old style incandescent light bulbs were very inefficient because most of their energy produced heat, not light. Care to guess what percent of an incandescent bulb's energy did factor into producing light? If you guessed 10 percent, you're right.
Unfortunately, only providing lighting in the outdoor areas closest to your building may not be enough to prevent accidents. Ensuring that your property is properly lit is the best way to mitigate your business’s liability.
It's easy to forget how much copper wiring can go into a house or a building, especially since almost all of it is placed behind your walls. It is quite a substantial amount of wires to run, but an electric contractor is able to keep track of all the wiring and make sure it works properly.
Electric energy is created through the flow of electrons. Matter is completely made up of high numbers of atoms. Each atom contains a nucleus, protons, neutrons and electrons. The nucleus is in the center of every atom and contains the protons and neutrons. Protons are positively charged while the neutrons are negatively charged.
Hiring an electrical contractor is a great way to be certain that all of your electrical appliances and lighting systems are functioning properly. This means inspecting wires, circuits, outlets and electrical systems and making adjustments and repairs as needed.
Meeting the needs of electrical consumers is challenging, especially during the hottest times of the long summer days. The electrical power lines constructed by our expert engineers ensure that a safe, reliable system is in place to meet peak demand times.
The world’s biggest light bulb is located in Edison, New Jersey. It’s 14 feet tall, weighs eight tons, and sits on top of the Thomas Edison Memorial Tower.
Maintaining power lines requires diligence, a keen eye, and knowledge of the industry. Our crews will inspect lines on a regular basis to detect and repair problems before they negatively impact residents and businesses.
You probably know that magnets can repel each other on one side, and attract each other on the other side. Magnetism is related to electricity and in fact electricity has what’s known as an electromagnetic current. So two positive charges repel each other, as do two negative charges. On the other hand, opposite charges attract each other.
Did you know aluminum is often used for medium and high voltage lines? These conductors are often strengthened with steel.
“To avoid guesswork, work with an expert. They’ll help you evaluate your needs and calculate both total and startup wattage requirements based on the kind of appliances you plan to power …” (Portable vs. Standby Generators: Which is Best?)
When it comes to power lines, there are several different distribution lines that help deliver power to buildings and homes. Primarily, distribution lines connect the larger parts of a community to a substation, lateral distribution lines connect the neighborhood, and smaller distribution lines connect individual residences.
About 200 years ago, Alessandro Volta found that, when two different strips of metal were placed in a sulphuric acid solution and connected with wire, a current was formed. This is how Volta created the first electric battery.