Red River Motorwerks

(on highway)
Auto Repair in Moorhead, MN
Auto Repair

Hours

Monday
8:00AM - 5:00PM
Tuesday
8:00AM - 5:00PM
Wednesday
8:00AM - 5:00PM
Thursday
8:00AM - 5:00PM
Friday
8:00AM - 5:00PM
Saturday
Closed
Sunday
Closed

Location

3328 Highway 10 E
Moorhead, MN
56560

Photos

Red River Motorwerks Photo

Services

  • Auto Care Services
  • Oil Change
  • Maintenance
  • Automotive Tuning
  • Manufacture Maintenance Services
  • Transmission Services
  • Engine Tune-Ups

Latest

Motor swap on this BMW 335i. #n54
This Porsche Boxster was in for replacing the prone to fail IMS bearing. While performing this service we replaced the worn out clutch, flywheel, and rear main seal. With a couple new axle boots this car will be ready to take on summer.
2020 Supra was in for new intake and strut brace. Something about this engine looks real familiar to us. 🤔
A little better look at the whole caliper from last weeks Audi S8 caliper refinish.
This Audi S8 was in this week for some brake work, yearly service, and BOOST. We had the calipers powder coated red with new style S8 badges. We also installed new brake pads and rotors all the way around. We added a little more power with a stage 1 @aprllc engine performance tune. We also coded in a boost gauge into his factory cluster. We would like to thank the guys at Elite Powder Coatings for the great work as always.
We at Red River Motorwerks would like to wish everyone a safe and Happy Labor Day weekend. We will be closed Monday.
Audi S6 in for P3 gauge install and coded in boost gauge in factory instrument cluster.
Last week we had this BMW M4 in for updating the rear tail lights to the newer style LCI version. #bmw #bmwm4 #bmwlciheadlightretrofit
Fried Clutch Friday. This BMW got all of the life out of this clutch disc.
Here’s another caliper refinish job we did on a 2016 Audi S6. Another huge shout out to the guys over at Elite Powder Coatings in West Fargo.
Wheel Wednesday. We set up this Audi S3 with a set of VMR 710 flow formed wheels in their optional Solar Rain powder coat finish. We love how this finish looks in the sun light. @vmrwheels #audi #audis3quattro #vmrwheels #flowformed
Now this is a winter wheel set up worthy of a Mercedes Benz E63 Brabus edition. BBS wheel wrapped in Bridgestone Blizzak WS90 snow tires. #bbswheels #bridgestone #blizzaks #mercedesbenz #brabus #e63
Porsche Boxster in for control arms and alignment. Hit us up for all your tire and alignment needs.
It’s that time of the year again. Audi S7 in for winter wheel swap.
VW Passat TDI in for timing belt service and DSG transmission service
Porsche Macan Turbo in for yearly service
All new pricing on APR Performance software. These price discounts are HUGE! APR Yesterday at 9:03 AM · New pricing on EVERY APR ECU/TCU Upgrade! Save an average of 35% and up to 77%! Get the details: http://goapr.io/2020price
Another Fried Clutch Friday going down on this Ford Focus RS.
Warning long post about taking your vehicle to untrained technicians. Does anyone see what’s wrong in this photo? Customer brought us his vehicle for an unrelated repair and during a visual inspection we found something was off with the wheel fitment. The customer had aftermarket wheels installed by the dealer where the vehicle was purchased. During the installation they ended up scratching his calipers because the wheel fitment wasn’t correct causing them to hit the calipers. Then instead of getting the proper wheel spacers and wheel lug bolts, they used an oversized centering ring to push the wheel out. This is extremely dangerous because it is nearly impossible to get the wheel tightened down evenly. The wheel should mount flat against the brake rotor hub. Then we found on the rear of the vehicle they stripped out 6 out of the 10 wheel lug bolts. They even went as far as putting plumber pipe thread sealant tape on the wheel lug and reinstalled. Luckily we were able to catch this and fix all the mistakes that were made keeping the customer and others safe.
Warning long post about taking your vehicle to untrained trained technicians. Does anyone see what’s wrong in this photo? Customer brought us his vehicle for an unrelated repair and during a visual inspection we found something was off with the wheel fitment. The customer had aftermarket wheels installed by the dealer where the vehicle was purchased. During the installation they ended up scratching his calipers because the wheel fitment wasn’t correct causing them to hit the calipers. Then instead of getting the proper wheel spacers and wheel lug bolts, they used an oversized centering ring to push the wheel out. This is extremely dangerous because it is nearly impossible to get the wheel tightened down evenly. The wheel should mount flat against the brake rotor hub. Then we found on the rear of the vehicle they stripped out 6 out of the 10 wheel lug bolts. They even went as far as putting plumber pipe thread sealant tape on the wheel lug and reinstalled. Luckily we were able to catch this and fix all the mistakes that were made keeping the customer and others safe.
Porsche 911 bathing in some snow flurries.
License plate surrounds are here. Who wants some?
Another caliper restoration went down this week on this Porsche 911. Big shout out to Dan over at Elite Powder Coatings for the refinish. Let us know if you’re looking to change colors or just get them back to their original finish.
One of our customers stopped by with his custom cafe racer style BMW. Definitely worth a share.
Another caliper refinish on this 2017 Porsche 911. From factory they came with a faded black finish unless you wanted to add the pricey option to have them in red. For a fraction of the cost we refinished them in red and added the factory Porsche Logos. Loved how this turned out with the color of this car. Thanks again to the pros over at Elite Powder Coatings for the great work. Let us know if you’re looking to get yours done.
Front End Friday. With winter here and all the night driving that comes with it, there’s no better time for some light upgrades. We took this F250 from the Stone Age to Space Age with a set of Morimoto XB LED headlamp assemblies and XB LED fog light assemblies. We are your local Morimoto dealer and can set you up with a pair of these bad boys. They have assemblies like this for many models. Check them out and give us a call for pricing and installation. #ford #fordf250 #superduty #morimoto #morimotolighting
Throw back Thursday at a job we did back in August. Took this G Wagon to the next level with Eibach 2” lift springs coupled up with fox shocks with remote reservoirs, castor correcting poly radius arm bushings, and extended stainless steel brake and diff lines. The customer finished it up with a set of 33” tires. This is by no means a pavement princess. This customer has already put this set up to the test.
We have a set of nearly new Mercedes Benz ML Floor mats we do not need. Free.
This new VW GLI is ready to take on old man winter with a new set winter tires. Give us a call for pricing today.
Red River Motorwerks would like to give thanks to all of our customers for choosing us for your automotive service needs. Thank you and we wish everyone a safe and Happy Thanksgiving. We will be closed Thursday and Friday to spend time with our families. We will return to normal business hours Monday.
Wheel Wednesday. We set up this Ford Escape with a set of BBS wheels wrapped in a set of Continental DWS06s. This BBS wheels are built with the highest quality. We were even able to retain the factory center caps to keep that OE finish. We are your local BBS wheel dealer and would love to get you a quote on set for your vehicle.
We love helping our customer’s make their car unique. Life’s too short to drive boring cars. Harpal Singh‎Red River Motorwerks December 5 at 12:49 PM · My favorite small business in Minnesota Please check em out  The bank probably wouldn't like you doing that to their car haha
We had the pleasure of performing the yearly service on this Bentley Continental GT V8 S. Rated at 520 hp and 502 lb-ft of torque these are cars are built for speed and luxury.
Here’s a look at the timing chains and tensioners on an Audi 3.0T engine. This one had jumped due to being stretched. Considered as a lifetime part by the manufacturer. However, the manufacturer in many cases considers lifetime as 10 years or 100,000 miles. Most of today’s vehicles have no problem reaching these lifetime standards. Unfortunately not all of these vehicles can easily be inspected. There are some signs you may be at risk of worn chains. Listen for rattle at start up and idle, long crank times starting, and obviously warning lights could be warning signs. If you suspect your timing chain may need replacement give us a call and we can help advise.
Wheel Wednesday. We fit up this F250 with a set of 17” Black Rhino Primm wheels wrapped in some Falken Wildpeak AT3s. Not only do we love the look of the smaller wheel set up but the increase in tire side wall provides for a smoother ride and better off-road capabilities. We are your local Black Rhino wheel dealer and would love to get you a price for your rig.
What’s better than one twin turbo Porsche? Yep, two beautiful Porsche turbos visited the shop yesterday. First a brand new Porsche Macan Turbo and second a Porsche 911 Turbo. Both very awesome cars.
🔥🔥🔥🔥🔥Giveaway alert🔥🔥🔥🔥🔥 We just got a fresh rack of hats and with Christmas right around the corner we would love to give a couple away. You know the drill like, share, and comment on this post for a chance to win. Winners will be announced Monday.
M car Monday. We had this BMW M3 in for a refresh on the front suspension. Turner Motorsport lower control arm bushing kit with OE arms. Finished correctly with a new alignment. These cars keep going up in value. Glad to see we can keep this one in tip top shape.
Red River Motorwerks would like to wish everyone a safe and Merry Christmas. We will be closed 12/24-12/27 to spend time with our families. Thank you.
The BNG team has the new shop truck looking mint. Thanks again guys you rock! BNG Team December 23 at 4:02 PM · Yup! Our promo team is working hard today during this nice winter storm we're having! Thank you Red River Motorwerks for trusting us to get the job done! If you'd like a new wrap for your vehicle give us a call! 701.526.3539 or email: promos@bngteam.com
🔥🔥🔥🔥GIVE AWAY ALERT🔥🔥🔥🔥 We are in the Christmas spirit over hear at Red River Motorwerks and we want to give away a few Christmas gifts. First off we have our new zip up hoodies with our embroidered logo and black out trim. We also brought back a limited supply of the Buffalo plaid flannels. Can’t forget the New hats and plate surrounds. We also have a early sneak peak at our latest shirts still hot off the press with our classic banner logo. These will come in black or grey on premium blend shirts. We will be giving away two of the hoodies, flannels, and hats. Then we will give away four of our new shirts your choice on color. All of the winners can take a set of plate surrounds as well. To be entered for a chance to win please like our page, like this post, and comment on this post. Winners will be picked Christmas Day. Good luck and Merry Christmas. Ho Ho Ho!🎅🧑‍🎄❄️☃️
Any guesses on what this might be? Hint. It came from an Audi.
Red River Motorwerks would like to wish everyone a safe and Happy New Year. We would also like to thank all our customer’s who were there through this crazy year. Without you we wouldn’t be here. We look forward to 2021 and the adventures it brings. We will be closed Today in observance of the Holiday.
Never too old for a little fun. The 71 year old owner of this VW GTI is getting a boost in power thanks to some APR performance software. Looking to add power to your VW or Audi, but worried about losing your warranty? Ask us about APR’s APR PLUS software option. All of the power with a warranty.
We had the opportunity to help get this one of a kind Mercedes Benz G wagon ready to compete in the 2021 Baja XL Rally. It is a Navigational Rally Race from Tecate, Mexico to Cabo and back to Tijuana over 3000 miles! Hope it’s going well Nick and Lesley. Have fun. Here is a quick video about the rally: www.youtube.com/watch?v=woHcEp5k_AA
The new jet tags are in. Who wants one or two? Leave a like and comment and we will pick a couple lucky winners.
Friday is a good day for a Ferrari to stop by and slap on a new set HRE wheels. Check out this F355 spider and it’s new shoes. We love seeing more and more of these exotics in our area. #ferrari #f355spider #hrewheels #weneedmoreexotics
We are looking to add to our team. Looking for a service advisor assistant, experienced technician, and an entry level technician willing to learn. Please let us know If you or someone you know might be interested in working with a great crew and fun cars. RED RIVER MOTORWERKS Service Advisor
This Audi RS5 was in for new brakes and rotors. We also upgraded the rear parking brake with a Tesla remote caliper.
A couple of wheel sets going out recently for Wheel Wednesday. First off we have a set of 20” Fuel Rebels on this Ford Raptor and another set of 20s on this Dodge Nitro RT. We are your local source for replacement wheels of any brand. Give us a call and we can help you find the look you want.
We know it’s not a Euro, but we like cool cars so we let this one slide. This Mitsubishi Evo was in for a clutch upgrade. The customer got all the life out of this one.

Information

Company name
Red River Motorwerks
Category
Auto Repair

FAQs

  • What is the phone number for Red River Motorwerks in Moorhead MN?
    You can reach them at: 218-284-1717. It’s best to call Red River Motorwerks during business hours.
  • What is the address for Red River Motorwerks on highway in Moorhead?
    Red River Motorwerks is located at this address: 3328 Highway 10 E Moorhead, MN 56560.
  • What are Red River Motorwerks(Moorhead, MN) store hours?
    Red River Motorwerks store hours are as follows: Mon-Fri: 8:00AM - 5:00PM, Sat-Sun: Closed.