Sandblasting uses a high powered jet of compressed air to blast sand or other abrasive particles (mixed with water and centrifugal force to remove through cleaning or abrading encrusted materials). Sandblasting is also the fastest ways to clean or abrade surfaces.
Why is pure iron so rare? Because iron and oxygen readily react with one another to produce rust. While corrosion in the form of rust is the scourge of metal, fortunately sand blasting can be used to quickly and effectively remove rust from even small crevices and tiny items.
Large-scale sandblasting jobs are often done in a sandblasting room. These are specially designed rooms that can contain large amounts of abrasives. Sandblasting rooms are also well-ventilated so that breathing is safe.
Water, or wet, blasting is good for machinery that has hard-to-reach areas that need cleaning, especially inside the machinery. In most cases, both the liquid and abrasive can be recovered, so there is no environmental damage.
Do not cut corners on yourself or your crew members when it comes to safety and protective equipment. Select from our complete range of helmets, protective eyewear, gloves, and hearing protection.
Preparation is an important step for any type of improvement or construction process. With sandblasting, you can ensure that any surface has been fully cleaned and stripped and is ready to be worked on.
It’s important to remember that sandblasting has the potential to damage certain materials. For best results, let an experienced professional handle your sandblasting needs.
What is a sand blasting cabinet? This is a specialized closed compartment that is used to sand blast small items like automotive parts, antiques that need to be restored, and even hand tools. The cabinet allows the sand blaster to safely work with smaller pieces at a close distance.
Sandblasting equipment and techniques can also be used for sand carving materials, also called etching. Sand carving can be performed on various materials, such as glass, wood, metal, stone, and other materials to create designs and works of art!
What are the three ingredients that are needed for rust to form? Iron, water, and oxygen. When these three ingredients are combined, an amazing chemical reaction begins, and the end result is rust. And because iron, water, and oxygen are so prevalent – unfortunately rust is quite common too.
The type of media used in sand blasting depends on the specifications of the particular project. For instance, coal slag is effective at removing elements from steel, while steel grit will leave an extremely smooth finish.
One of the benefits of professional sandblasting is that we can adjust the media to specifically meet your job requirements. Common alternative abrasive media include coal slag, steel grit, silicon carbide, and glass beads.
While sand blasting is most commonly associated with the removal of rust, did you know that sand blasting can be used to remove a number of impurities from surfaces? Just a few types of materials that sand blasting can remove include soot, scale, water deposits, and grease.
Graffiti is a problem, and the different surfaces where it crops up create even greater problems. Wood, brick, concrete, metal, or other materials all require different abrasives to remove the offending material without damaging the substrate.
For some items, depending on the subsurface material, using bicarbonate of soda may be the preferred method of abrasion. Soda is softer than sand, and it will not harm most woods, metals, or plastics.
So how exactly does sand blasting work? By launching small bits of abrasive materials at a hard surface at a high speed, all imperfections are knocked loose and can then be easily washed off, creating a smooth surface for applying paint or another coating.
The first sand blasting machines from the late 1800s used water mixed with sand, but that changed in 1904. That's when Thomas Pangborn invented a sand blasting machine that used an air compressor so he could clean metal surfaces.
When the sandblasting technique was first developed, steam was the propellant. Sand was selected because it was cheap, readily available, and was available in varying degrees of coarse or fine for use in different applications.
The first sand blasting machine was invented in 1870 to strip rust and paint. These quickly took off, and industrial-level sand blasters were an indispensable part of production by 1893, when they were used to clean a variety of large industrial surfaces.
When sandblasting first started in 1870, it was used to clean large surfaces such as ship hulls and even the Golden Gate Bridge. Sandblasting was and is still used as a source of surface preparation and cleaning; however, it has also been progressing as an art form, used to etch glass and wood.
With pressure sandblasters, the media is contained in a large canister under high pressure, similar to the concept behind an aerosol can. This pressure allows for rapid fire of the media, giving enough power to strip the targeted surface.
We specialize in sandblasting, painting, and pipe coating. Been in business for more than 30 years! Call 307-687-1015 to schedule
Do you have equipment that’s covered in grease, rust, soot, scale or water deposits that needs to be thoroughly cleaned in order to be usable? Sandblasting provides a powerful and effective way to clean old surfaces.
Did you know that the sand that can be used in a sand blaster actually comes in many different grades, which vary in terms of thickness and abrasiveness? The type of sand used will depend on the surface that’s being treated and the level of damage that needs to be corrected.
Given the beating that most tractors take and the conditions they have endured, they are bound to have a fair amount of rust and corrosion on them. Sandblasting is the best and sometimes only way to get rid of this rust.
Different sandblasting media are great for different applications. Walnut shells are great for removing paint from or cleaning delicate surfaces, whereas aluminum oxide is ideal for general cleaning and paint removal.
