When it comes to investing in new tires for your vehicle, it’s recommended that you buy the best tire your budget allows for and one that’s going to fit your particular driving needs. According to the UTQG scale, available traction grades are from highest to lowest: AA, A, B, and C.

It’s important to make an informed agricultural tire choice. Why? As agricultural tire experts point out, your tire choice represents an upfront cost; and it carries additional costs in time, fuel consumption, efficiency, and reliable performance.

Ask your tire expert about having your wheels aligned and balanced whenever your tires are changed out or rotated. In fact, uneven tread wear in your tires may be an indication that your wheels need to be properly aligned.

Tread lugs are particularly important on agricultural tires. As the lugs contact pavement or dirt, they compress and expand outward. This action provides the surface contact and gripping power that produce reliable traction and stability.

The P7 was the first low-profile and high-performance radial tire. This tire, introduced in the 1970s by Pirelli, was developed for the Lancia Stratos.

When it comes to industrial tires, keep in mind that, in most cases, use determines the time that a tire will last. However, in general, solid rubber tires will generally last two to three times longer than pneumatic tires.

Damage to rims and protection against punctures in tire sidewalls can be realized by using heavy-duty skid steer tires. Tires in this category have considerably thicker sidewalls than standard duty and have rim guard protection.

If you notice wear on your tire(s) which occurs only on one edge, you may have an issue with the alignment of your wheels. If you notice this wear pattern on any of your tires, have your wheel alignment checked.

Rubber tires rely on vulcanization, which alters the molecular structure to make rubber flexible, elastic, and stable. Without vulcanization, natural latex is problematic. It’s smelly, sticky, and semi-liquid at warm temperatures, and hard and brittle at cold ones.

Tires can wear out prematurely in hot or cold areas. Pavement retains heat, so tires can dry out and crack before their tread has worn down fully.

The life of any industrial tire is affected by many variables. These include the average typical load carried by the vehicle, average load carried by the tire, inflation pressure, ambient temperature, floor surface and conditions, and exposure to oils and solvents.

When buying tires, make sure they are all the same type and try not to mix radial tires with bias ply tires. If you must do this on a two-wheel drive vehicle, always install the radial tires on the rear axle.