When designing multi-use pathways in parks or other recreational areas, you can create a better and safer traffic pattern by designating one side for pedestrians and the other for bike riders. This separates the two groups, and reduces the chances of accidental run-ins.
The first street asphalt, which was placed on a concrete base, was first used in Paris in 1858 and instantly became popular. This pavement system used asphalt cement and sand from 40-50mm thick, a 40mm-thick binder of broken stone and asphalt cement, and a base layer.
While asphalt refined from petroleum first appeared in the US in the mid-1870s, most asphalt was obtained from Lake Trinidad and Bemudez Lake in Venezuela. By 1900, refined asphalt was more widely accepted, and by 1907, it became the predominant material used.
Does your asphalt driveway appear to be in bad shape? Whether you can get away with repairing or whether you'll need to replace the existing driveway with a new one will depend in great part on the condition of the base layers.
When it comes to parking lot paving, design considerations are important. A well designed and constructed parking area will not only be safe and attractive but will require minimal maintenance and repair.
In the constructing of asphalt driveways, the general rule of thumb is that the compacted thickness of each layer is typically around three quarters the thickness of loose hot asphalt mix. Driveways will need a minimum compacted thickness of 2 inches of hot mix asphalt.
Asphalt is not soluble or harmful in a water environment. It has been used successfully for many years in fish hatcheries, reservoirs or drinking water for human consumption, and other environmental protection applications.
It’s important to keep in mind that your newly paved driveway will need a bit of time to cure following its installation in order to maintain the integrity of the structure. The general rule of thumb is to wait at least 12 hours before parking or putting any type of heavy load on it.
If your ball has ended up on the cart path, the rule of play is very specific. Mark the relief spot that is no closer to the pin with a tee, and another tee one club length away. Drop the ball between these two tees and play the shot.
Portland cement concrete (PCC) is a combination of aggregate, water, and Portland cement to form a hard construction material often used in paving. Other common terms for this substance are cement and concrete.
Unfortunately, you may be ultimately liable for any injuries golfers have when riding in your carts. If you need to minimize your risk exposure, it’s a good idea to ensure that all your golf cart pathways are in good condition.
Codes and permits in residential areas are quite specific and the permits need to be obtained. As a company experienced in residential paving, we will handle permits and make sure that your new drive adheres to local ordinances.
Although visitors to your golf course may appreciate the beauty and the challenge it provides during their game, they’re unlikely to return when riding in your golf carts hurts their back. Ensuring your golf cart paths are smooth and in good repair could help keep attendance high.
Stone aggregate can add instant curb appeal to your home. Exposed aggregate creates color and visual interest in concrete walkways, driveways, porches and patios. Or, use aggregate chip seal techniques to refurbish and revitalize asphalt walkways and drives.
The asphalt industry reduced total emissions from its plants by 97% from 1970 to 1999. The EPA considers them as only minor sources of industrial pollution. Asphalt pavements currently consume less fuel and produce lower levels of greenhouse gases than ever before.
Modern road-making techniques first started showing up in the 1800s. The Scottish engineer John McAdam built multi-layer roadbeds of gravel and crushed stone aggregate, then pressed them together with a heavy roller. He was a municipal surveyor, and his first project was the Bristol Turnpike in 1816.
In the new construction of a commercial parking lot, top soils first need to be excavated before a crushed aggregate base course (or stone base) is installed. Then the base is shaped, graded, and compacted with a vibratory roller to attain maximum compaction.
If you have a gravel or stone cart path, then even a little rain can be a big problem, turning the entire path into mud for hours and even days later. When you pave your golf cart path, it becomes waterproof, so you don't have to worry about rain.
Did you know that the asphalt was first used in road paving in 1824? Here, asphalt blocks were placed on the Champs-Elysees in Paris. Today, 96 percent of all paved roads and streets in the U.S. are surfaced with asphalt.
While a few cracks in the parking lot asphalt aren’t a big deal, letting your lot fall into disrepair could make it difficult for customers to come see you. If you’re concerned that your lot may be a treacherous place for people to park, we’re always ready to repave it for you.
Did you know that proper paving of your driveway surface can in many cases improve the drainage of rain and melted snow around your property? This can be critical, as it can reduce or eliminate any flooding issues.
Out of the more than 2 million miles of paved roads and highways in the United States, approximately 94% of these roadways are constructed with asphalt. Likewise, in Europe over 90% of total roadways have been constructed with asphalt surfaces.
