If your building has been experiencing an inordinate amount of power outages lately, there could be an issue with the wiring. Bringing in a skilled commercial electrician can be the best way to uncover and correct the issue.
How old is your heating and air-conditioning system? If you had to pause and think about it, it may be time to replace it. Today’s systems are significantly more efficient, and will save you money every month.
Did you know aluminum is often used for medium and high voltage lines? These conductors are often strengthened with steel.
It's possible to save 20 to 30 percent on your heating and cooling bill with a new, more energy-efficient residential HVAC system, according to the U.S. Department of Energy.
The electrical measure of power, the watt (W), is named after Scottish inventor James Watt, (1736-1819), who perfected the steam engine, improving its ability to produce more energy with greater efficiency. A watt is also a measure of physical power, equivalent to 1/746 horsepower (hp).
Did you know that natural gas is considered to be one of the world’s safest sources of energy? In addition, natural gas is consistent, reliable, and can yield long-term savings on your energy bills.
Keeping your heating and air-conditioning system properly maintained is vital to keeping it running efficiently for years. We recommend a yearly check-up – either at the start of the heating season or at the start of the cooling season.
Your electrical panel is the heart of your businesses electric system. The panel’s job is to act as traffic control and send electrical currents to each circuit in the home/building. Each breaker in the panel regulates the electricity passing through.
Why is indoor air quality so important? Pollutants such as bacteria, smoke, and mold can make life miserable for workers and customers with asthma or allergies.
The safest way to move lengthy objects, such as ladders or flag poles, around your home is to have two people carry it horizontally. This helps to avoid contact with overhead wires.
One of the fastest and simplest ways to save energy on heating and cooling is to install a programmable 24-hour thermostat. By preprogramming your settings, you can tailor your heating and cooling to suit your lifestyle and needs without having to micromanage your system.
There are several methods available that can be used to strengthen the poles used in power line construction. The best approach involves anchors buried in the ground, with guy wires attached both to those anchors and to the pull. Additionally, a push brace may be used.
Did you know that it is considered unsafe to close off more than 20 percent of the registers in your home? This can actually cause high resistance, as well as unnecessary heat build-up in the furnace.
It’s important to remember that failing to get your office building up to code could lead to some hefty fines and the eventual shutdown of your building. If you could use a little help with electrical system upgrades, we’re happy to lend a hand.
If you have an older system, check your inventory of refrigerant. If it is one that is already phased out, or is soon to be phased out, we can help. We will discuss which option is better – modifying your existing system, or installing a new system.
Did you know that a bolt of lighting lasts less than a second but it can deliver a charge of up to 3,000,000 volts?
On gas furnaces that do not use a spark ignitor, there is usually a hot surface ignitor instead. If the ignitor fails to come on, then it will most likely need to be replaced. If you see a bright red glow in the burner compartment, then your ignitor is trying to come on.
In electrical terms, apparent power (volt amps) is the product of the applied voltage and current in an AC circuit. Apparent power is not the true power of the circuit, because the power factor is not taken into consideration in the overall calculation.
When you’ve been out running errands on an extra cold day, it can be frustrating to come home to a frigid home. Let us show you how a programmable thermostat could improve your comfort level.
Before you add or upgrade the insulation in your attic, have the wiring system inspected. Knob and tube systems were designed to be suspended in the air, and if they are covered by insulation, a fire hazard is created.
While an HVAC system that breaks down under warranty can be a nuisance, having it happen after your warranty expires can be an expensive problem for any business. If you need to ensure that your installation doesn’t damage the equipment going in, we’re always here for you.
All of the electric systems in the US must conform to the National Electrical Code, or NEC, and that includes commercial systems. This was originally published in 1897, with the most recent version published in 2011. An experienced electrical contractor can make sure your business is up to code.
