What is the building code for deck railing height? According to the International Residential Code (IRC), guardrails must be at least 36" in height measured from the deck surface to the top of the rail.
Wrought iron is durable and long-lasting, has incredible corrosion resistance and requires painting only once every 3 to 5 years. The paint may last even longer depending on environmental factors.
According to the International Residential Code (IRC), guardrails used in commercial decks attached to multifamily buildings must be at least 42" in height.
Wrought iron can easily enhance the curb appeal of any home. So, if you’re looking to sell your home, the addition of wrought iron railings will definitely increase the value of your property.
What about aluminum vs. wrought-iron railings? While steel that has to be repainted every few years, most aluminum railings are powder-coated, which gives them a superior long-lasting finish. Moreover, iron is much heavier than aluminum.
What is the difference between structural post and post sleeve? A structural post on its own provides the strength required to satisfy code requirements, while a post sleeve is a decorative cover that slides over a structural interior post.
Stainless-steel railings are cost-effective, especially compared to fine quality wooden railings. They are easier and quicker to install and will last indefinitely because of their strength and durability.
One of the benefits of wrought iron railings is that they have an open design that allows you to see beyond its bars, providing an minimally-obstructed view of the world.
How far should balusters be spaced for child safety? Balusters, the vertical shafts that support the handrail, must be installed close enough that the space between them is no greater than 4 inches.
Railing inspection codes ensure your safety and security. So, whether or not you are having your railing inspected, we recommend you to follow building codes to ensure your deck is safe for your family and friends.
Metal railings are available in iron, aluminum and steel. While aluminum railing doesn’t rust, iron or steel can if it is not powder coated or painted.
Metal railings are pretty easy to maintain. When these handrails are properly sealed with a protective layer of rust-proof coating, they will look great for years to come.
While cable railings are designed to keep the cables taut, as time passes a number of factors may cause them to loosen and sag. When that happens, tension adjustment is needed to keep them compliant with safety regulations.
When we install a railing for your deck, we adhere to the International Residential Code as required for this type of construction. This means that the railing will be rated to withstand concentrated pressure loads of at least 200 lbs.
While railing installation results in a durable structure, time, weather and usage can cause deterioration. As such, they should be inspected periodically to make sure they meet safety standards.
If your building has ramps for handicap access, sturdy metal railings are needed to help people traverse the area and to prevent accidental falls off it.
There were times when homeowners had limited options in the kinds of materials they could use for railings. However, today, railings are available in a wide variety of materials that offer everything you need: beauty, durability, minimal maintenance, and more.
How much does railing cost? The cost of railing depends on project size, complexity and the material of choice. Contact us and we will walk you through your options to find the perfect railing that fits your budget.
The older a balcony is, the more likely the need for repair. Below surface corrosion of steel or iron railings can occur causing breakage. Look for wobbling, unsteady railings, or cracked and missing concrete around penetration points.
For longest protection against the elements, particularly in areas where they are highly visible, railings whose surfaces have been powder coated work well and deliver an appealing visual aesthetic.
Aluminum is a preferred metal for many marine applications – including railings – because it is lightweight, strong, durable and corrosion-resistant. It is also more budget friendly than stainless steel or brass.
Railings can be used to define different areas, improving traffic flow and providing a strong measure of safety. During the initial consultation, we will discuss the purpose of your railings and how to best meet that goal.
Balconies use one of two types of construction. One is creating a steel frame that is attached to the façade of the building. The other is a continuous slab method which is simply an extension of the structure’s floor to which the railings are attached.
Did you know that origin of the word rail is "to move in a straight line," and refers to the horizontal members of a railing system? The vertical ones (currently called balusters) were originally known as "pales."
